Matthew Calderon

When installing these kits, there have been a few instances where the the dash bezel will not want to "snap" into place unless extreme force is used. Below shows a modification for removing (2) tab...

If the kit is working except for SWC (steering wheel controls), follow these steps to correct the issue. This article assumes the controls worked with the factory radio before it was removed.If you...

If you experience both issues, the connectors for the radio and the PAC data interface may be mixed up. On the PAC interface, locate the Radio Harness connector. This connector is labeled at the bo...

f you experience both issues, the connectors for the radio and the PAC data interface may be mixed up. On the PAC interface, locate the Radio Harness connector. This connector is labeled at the bot...

If you cannot hear the person on the call, follow the steps below to sort out the problem.Is the correct speaker connector plugged into? If the wrong connector was used, simply connect to the corre...

If Sirius radio isn’t working, follow these steps to figure out why. Is the SiriusXM icon on the radio grayed out? Did you purchase a SiriusXM tuner? A SiriusXM tuner is required to retain SiriusXM...

Follow these steps to update the SE-P14 & SE-P24. With the radio off, insert the SD card into the radio.  (Figure A) Turn the radio on and then press the NAV icon. Follow all the prompts to initial...

If the kit is not working properly or the factory camera quit working, try these steps to fix the issue.Open the hood and locate the fuse box next to the battery. Remove the radio fuse for 5 second...

If the kit is not working properly or the factory camera quits working, try these steps to fix the issue.Open the hood and locate the fuse box next to the battery. Remove the radio fuse for 5 secon...

If the gauges are only partially working, this may be due to missing CAN data information. To solve this problem, reset the PAC RadioPro CAN data interface. There are two different methods for rese...