Matthew Calderon

If you experience both issues, the connectors for the radio and the PAC data interface may be mixed up. On the PAC interface, locate the Radio Harness connector. This connector is labeled at the bo...

If your contacts were not imported when using Android Auto, it may be due to not allowing the necessary permissions or a glitch in the initial connection setup. To import your contacts, follow thes...

If the gauges are only partially working, this may be due to missing CAN data information. To solve this problem, reset the PAC RadioPro CAN data interface. There are two different methods for rese...

To pair your Stinger radio to your mobile device, navigate to the Bluetooth settings on the mobile device. Locate the Stinger radio in the Bluetooth list and then select it to pair. When the pairin...

Unplug all connections from the dashcam.Unplug the rear camera and then plug it back in firmly, ensuring that the camera is plugged in all the way. This is most likely the cause of the problem.Plug...

In Bose-equipped vehicles, all audio components are connected in a loop. If an audio component is missing, you will not have sound. For this reason, the RB10GM14(V2), RB10GM14HP, RB10GM14X provides...

If the radio doesn’t activate the backup camera screen when the vehicle is in reverse, it may indicate that the reverse wire has not been properly connected. On the radio-side harness of the PAC in...

If the steering wheel Voice button doesn't activate Google Assistant or Siri, try these troubleshooting steps. Inspect the LED light on the PAC RP4-FD11 “blue box” interface. Does it flash when you...

If you are looking to update the firmware on your Stinger HEIGH10 radio, please watch the video below! This tutorial covers all applications such as HEIGH10 stand alone applications, as well as int...

Certain Stinger radio kits* come equipped with a video filter known as the RPA-VA1. If this component is not connected, the backup camera image will not display on the radio, as it disrupts the con...