Matthew Calderon

If you cannot hear the person on the call, follow the steps below to sort out the problem.Is the correct speaker connector plugged into? If the wrong connector was used, simply connect to the corre...

If Sirius radio isn’t working, follow these steps to figure out why. Is the SiriusXM icon on the radio grayed out? Did you purchase a SiriusXM tuner? A SiriusXM tuner is required to retain SiriusXM...

If the kit is working except for SWC (steering wheel controls), follow these steps to correct the issue. This article assumes the controls worked with the factory radio before it was removed.If you...

This article contains the latest firmware for your Heigh10. The following firmware is only for the Heigh10 "X version radios.This can be verified two different ways: If Skytraq (circled in red) is ...

This article contains the latest firmware for your HORIZON10 radio and all of the legacy firmware with a revision history.  Here is a link to a video tutorial on the firmware update process using ...

If the kit is not working properly or the factory camera quit working, try these steps to fix the issue.Open the hood and locate the fuse box next to the battery. Remove the radio fuse for 5 second...

Follow these steps to update the SE-P14 & SE-P24. With the radio off, insert the SD card into the radio.  (Figure A) Turn the radio on and then press the NAV icon. Follow all the prompts to initial...

 This tutorial explains how to add a “highs” amp to a Stinger integrated radio kit. The vehicle must be non-amplified.Connect the speaker wires.Locate the speaker connector harness from the PAC int...

 This tutorial explains how to add a “highs” amp to a Stinger integrated radio kit. The vehicle must be non-amplified.Connect the speaker wires.Locate the speaker connector harness from the PAC int...

When installing these kits, there have been a few instances where the the dash bezel will not want to "snap" into place unless extreme force is used. Below shows a modification for removing (2) tab...